Running in parallel

PyClaw can be run in parallel on your desktop or on large supercomputers using the PETSc library. Running your PyClaw script in parallel is usually very easy; it mainly consists of replacing:

from clawpack import pyclaw


import clawpack.petclaw as pyclaw

Also, most of the provided scripts in pyclaw/examples are set up to run in parallel simply by passing the command-line option use_petsc=True (of course, you will need to launch them with mpirun.

Installing PETSc

First make sure you have a working install of PyClaw. For PyClaw installation instructions, see installation.

To run in parallel you’ll need:

  • PETSc a toolkit for parallel scientific computing. The current recommended version is 3.3 with latest patch.

  • petsc4py: Python bindings for PETSc. The current recommended version is 3.3.

Obtaining PETSc:

PETSc 3.3 can be obtained using three approaches. Here we use Mercurial to get it. Look at for more information.


$ cd path/to/the/dir/where/you/want/download/Petsc-3.3
$ hg clone petsc-3.3
$ hg clone petsc-3.3/config/BuildSystem

For sh, bash, or zsh shells add the following lines to your shell start-up file:

$ export PETSC_DIR=path/to/the/dir/where/you/downloaded/Petsc-3.3/petsc-3.3
$ export PETSC_ARCH=your/architecture

whereas for csh/tcsh shells add the following lines to your shell start-up file:

$ setenv PETSC_DIR path/to/the/dir/where/you/downloaded/Petsc-3.3/petsc-3.3
$ setenv PETSC_ARCH your/architecture

For more information about PETSC_DIR and PETSC_ARCH, i.e. the variables that control the configuration and build process of PETSc, please look at

Then, if you want PETSc-3.3 configure for 32-bit use the following command:

$ ./config/ --with-cc=gcc --with-cxx=g++ --with-python=1 --download-mpich=1 --with-shared-libraries=1

whereas, if you want PETSc-3.3 64-bit do:

$ ./config/ --with-cc=gcc --with-cxx=g++ --with-python=1 --download-mpich=1 --with-shared-libraries=1 --with-64-bit-indices=1

Note that one of the option is –download-mpich=1. This means that mpich is downloaded. If you do not need/want mpich, remove this option. Note that you need MPI when using PETSc. Therefore, if the option –download-mpich=1 is removed you should have MPI installed on your system or in your user account.

Once the configuration phase is completed, build PETSc libraries with

$ make PETSC_DIR=path/to/the/dir/where/you/have/Petsc-3.3/petsc-3.3 PETSC_ARCH=your/architecture all

Check if the libraries are working by running

$ make PETSC_DIR=path/to/the/dir/where/you/have/Petsc-3.3/petsc-3.3 PETSC_ARCH=your/architecture test

Obtaining petsc4py:

petsc4py is a python binding for PETSc. We recommend installing petsc4py 3.3 because it is compatible with PETSc 3.3 and 3.2. To install this binding correctly make sure that the PETSC_DIR and PETSC_ARCH are part of your shell start-up file.

Obtain petsc4py-3.3 with mercurial:

$ cd path/to/the/dir/where/you/want/download/petsc4py
$ hg clone -r 3.3

The prefered method for the petsc4py iinstallation is pip

$ cd petsc4py-3.3
$ pip install . --user

Indeed, pip removes the old petsc4py installation, downloads the new version of cython (if needed) and installs petsc4py.

To check petsc4py-3.3 installation do:

$ cd petsc4py-3.3/test
$ python

All the tests cases should pass, i.e. OK should be printed at the screen.

NOTE: To run a python code that uses petsc4py in parallel you will need to use mpiexec or mpirun commands. It is important to remember to use the mpiexec or mpirun executables that come with the MPI installation that was used for configuring PETSc installation. If you have used the option –download-mpich=1 while installing PETSc, then the correct mpiexec to use is the one in ${PETSC_DIR}/${PETSC_ARCH}/bin. You can set this mpiexec to be your default by adding this line to your sh, bash, or zsh shell start-up file:

$ export PATH="${PETSC_DIR}/${PETSC_ARCH}/bin:${PATH}"

or this line in case you are using csh or tcsh shells:

$ setenv PATH "${PETSC_DIR}/${PETSC_ARCH}/bin:${PATH}"

You can test that you are using the right mpiexec by running a demonstration script that can be found in $PYCLAW/demo as follows:

$ cd $PYCLAW
$ mpiexec -n 4 python demo/

and you should get an output that looks like follows:

Hello World! From process 3 out of 4 process(es).
Hello World! From process 1 out of 4 process(es).
Hello World! From process 0 out of 4 process(es).
Hello World! From process 2 out of 4 process(es).

NOTE: An alternative way to install petsc4py is simply using the python script inside petsc4py, i.e.

$ cd petsc4py-dev
$ python build
$ python install --user

Testing your installation

If you don’t have it already, install nose

$ easy_install nose

Now simply execute

$ cd $PYCLAW
$ nosetests

If everything is set up correctly, this will run all the regression tests (which include pure python code and python/Fortran code) and inform you that the tests passed. If any fail, please post the output and details of your platform on the claw-users Google group.

Running and plotting an example


$ cd $PYCLAW/examples/advection/1d/constant
$ python use_PETSc=True iplot=1

This will run the code and then place you in an interactive plotting shell. To view the simulation output frames in sequence, simply press ‘enter’ repeatedly. To exit the shell, type ‘q’. For help, type ‘?’ or see this Clawpack interactive python plotting help page.

Tips for making your application run correctly in parallel

Generally serial PyClaw code should “just work” in parallel, but if you are not reasonably careful it is certainly possible to write serial code that will fail in parallel.

Most importantly, use the appropriate grid attributes. In serial, both grid.n and give you the dimensions of the grid (i.e., the number of cells in each dimension). In parallel, grid.n contains the size of the whole grid, while contains just the size of the part that a given process deals with. You should typically use only (you can also use q.shape[1:], which is equal to

Similarly, grid.lower contains the lower bounds of the problem domain in the computational coordinates, whereas grid.lowerg contains the lower bounds of the part of the grid belonging to the current process. Typically you should use grid.lowerg.

Additionally, be aware that when a Grid object is instantiated in a parallel run, it is not instantiated as a parallel object. A typical code excerpt looks like

>>> import clawpack.petclaw as pyclaw 
>>> from clawpack import pyclaw
>>> mx = 320; my = 80
>>> x = pyclaw.Dimension('x',0.0,2.0,mx)
>>> y = pyclaw.Dimension('y',0.0,0.5,my)
>>> grid = pyclaw.Domain([x,y])

At this point, is identically equal to grid.n, rather than containing the size of the grid partition on the current process. Before using it, you should instantiate a State object

>>> num_eqn = 5
>>> num_aux=1
>>> state = pyclaw.State(grid,num_eqn,num_aux)

Now contains appropriate information.

Passing options to PETSc

The built-in applications (see Working with PyClaw’s built-in examples) are set up to automatically pass command-line options starting with a dash (“-”) to PETSc.