filpatch_orig.f90 File Reference

Go to the source code of this file.

Functions/Subroutines
recursive subroutine	filrecur (level, nvar, valbig, aux, naux, t, mx, my, nrowst, ncolst, ilo, ihi, jlo, jhi)
integer pure function	coarse_index (n, i, j)
logical pure function	sticksout (iplo, iphi, jplo, jphi)

Function/Subroutine Documentation

coarse_index()

integer pure function filrecur::coarse_index	(	integer, intent(in)	n,
		integer, intent(in)	i,
		integer, intent(in)	j
	)

Definition at line 260 of file filpatch_orig.f90.

References coarse_index().

        implicit none
        integer, intent(in) :: n, i, j
        coarse_index = n + nvar*(i-1)+nvar*mx_coarse*(j-1)

Here is the call graph for this function:

filrecur()

recursive subroutine filrecur	(	integer, intent(in)	level,
		integer, intent(in)	nvar,
		real(kind=8), dimension(nvar,mx,my), intent(inout)	valbig,
		real(kind=8), dimension(naux,mx,my), intent(inout)	aux,
		integer, intent(in)	naux,
		real(kind=8), intent(in)	t,
		integer, intent(in)	mx,
		integer, intent(in)	my,
		integer, intent(in)	nrowst,
		integer, intent(in)	ncolst,
		integer, intent(in)	ilo,
		integer, intent(in)	ihi,
		integer, intent(in)	jlo,
		integer, intent(in)	jhi
	)

Definition at line 17 of file filpatch_orig.f90.

References bc2amr(), coarse_index(), filrecur(), amr_module::hxposs, amr_module::hyposs, intfil(), amr_module::intratx, amr_module::intraty, amr_module::iregsz, amr_module::jregsz, amr_module::needs_to_be_set, amr_module::nghost, amr_module::outunit, prefilrecur(), setaux(), amr_module::spheredom, sticksout(), trimbd(), amr_module::xlower, amr_module::xperdom, amr_module::xupper, amr_module::ylower, amr_module::yperdom, and amr_module::yupper.

    use amr_module, only: hxposs, hyposs, xlower, ylower, xupper, yupper
    use amr_module, only: outunit, nghost, xperdom, yperdom, spheredom
    use amr_module, only: iregsz, jregsz, intratx, intraty, needs_to_be_set
    
    !for setaux timing
    use amr_module, only: timesetaux, timesetauxcpu

    implicit none

    ! Input
    integer, intent(in) :: level, nvar, naux, mx, my, nrowst, ncolst
    integer, intent(in) :: ilo,ihi,jlo,jhi
!   integer, intent(in) :: fill_indices(4)
    real(kind=8), intent(in) :: t

    ! Output
    real(kind=8), intent(in out) :: valbig(nvar,mx,my)
    real(kind=8), intent(in out) :: aux(naux,mx,my)

    ! Local storage
    integer :: i_fine, j_fine, i_coarse, j_coarse, n, k
    integer  :: iplo, iphi, jplo, jphi
    integer :: mx_patch, my_patch, mx_coarse, my_coarse, nghost_patch, lencrse
    integer :: refinement_ratio_x, refinement_ratio_y
    integer :: unset_indices(4)
    real(kind=8) :: dx_fine, dy_fine, dx_coarse, dy_coarse
    real(kind=8) :: xlow_coarse,ylow_coarse, xlow_fine, ylow_fine, xhi_fine,yhi_fine 
    
    !for setaux timing
    integer :: clock_start, clock_finish, clock_rate
    real(kind=8) :: cpu_start, cpu_finish  

    ! Interpolation variables
    real(kind=8) :: eta1, eta2, valp10, valm10, valc, valp01, valm01, dupc, dumc
    real(kind=8) :: ducc, du, fu, dvpc, dvmc, dvcc, dv, fv, valint

    ! Cell set tracking
    logical :: set
    integer(kind=1) :: flaguse(ihi-ilo+1, jhi-jlo+1)

    ! Scratch storage
    !  use stack-based scratch arrays instead of alloc, since dont really
    !  need to save beyond these routines, and to allow dynamic memory resizing
    !
    !     use 1d scratch arrays that are potentially the same size as 
    !     current grid, since may not coarsen.
    !     need to make it 1d instead of 2 and do own indexing, since
    !     when pass it in to subroutines they treat it as having dierent
    !     dimensions than the max size need to allocate here
    
    !--      dimension valcrse((ihi-ilo+2)*(jhi-jlo+2)*nvar)  ! NB this is a 1D
    !array 
    !--      dimension auxcrse((ihi-ilo+2)*(jhi-jlo+2)*naux)  ! the +2 is to
    !expand on coarse grid to enclose fine
    ! ### turns out you need 3 rows, forget offset of 1 plus one on each side
    ! the +3 is to expand on coarse grid to enclose fine
!!$    real(kind=8) :: valcrse((fill_indices(2) - fill_indices(1) + 3) &
!!$                          * (fill_indices(4) - fill_indices(3) + 3) *nvar)
!!$    real(kind=8) :: auxcrse((fill_indices(2) - fill_indices(1) + 3) &
!!$                          * (fill_indices(4) - fill_indices(3) + 3) *naux)
    real(kind=8) :: valcrse((ihi-ilo+3) * (jhi-jlo+3) * nvar)  
    real(kind=8) :: auxcrse((ihi-ilo+3) * (jhi-jlo+3) * naux)  
    ! We begin by filling values for grids at level level. If all values can be
    ! filled in this way, we return;
!!$    mx_patch = fill_indices(2) - fill_indices(1) + 1 ! nrowp
!!$    my_patch = fill_indices(4) - fill_indices(3) + 1 ! ncolp
    mx_patch = ihi-ilo + 1 ! nrowp
    my_patch = jhi-jlo + 1 

    dx_fine     = hxposs(level)
    dy_fine     = hyposs(level)

    ! Coordinates of edges of patch (xlp,xrp,ybp,ytp)
!!$    fill_rect = [xlower + fill_indices(1) * dx_fine, &
!!$                 xlower + (fill_indices(2) + 1) * dx_fine, &
!!$                 ylower + fill_indices(3) * dy_fine, &
!!$                 ylower + (fill_indices(4) + 1) * dy_fine]
    xlow_fine = xlower + ilo * dx_fine
    ylow_fine = ylower + jlo * dy_fine

    ! Fill in the patch as much as possible using values at this level
!!$     call intfil(valbig,mx,my,t,flaguse,nrowst,ncolst,fill_indices(1), &
!!$
!fill_indices(2),fill_indices(3),fill_indices(4),level,nvar,naux)
    call intfil(valbig,mx,my,t,flaguse,nrowst,ncolst, ilo,  &
                ihi,jlo,jhi,level,nvar,naux)


    ! Trimbd returns set = true if all of the entries are filled (=1.).
    ! set = false, otherwise. If set = true, then no other levels are
    ! are required to interpolate, and we return.
    !
    ! Note that the used array is filled entirely in intfil, i.e. the
    ! marking done there also takes  into account the points filled by
    ! the boundary conditions. bc2amr will be called later, after all 4
    ! boundary pieces filled.
    call trimbd(flaguse,mx_patch,my_patch,set,unset_indices) ! il,ir,jb,jt = unset_indices(4)

    ! If set is .true. then all cells have been set and we can skip to setting
    ! the remaining boundary cells.  If it is .false. we need to interpolate
    ! some values from coarser levels, possibly calling this routine
    ! recursively.
    if (.not.set) then

        ! Error check 
        if (level == 1) then
            write(outunit,*)" error in filrecur - level 1 not set"
            write(outunit,'("start at row: ",i4," col ",i4)') nrowst,ncolst
            print *," error in filrecur - level 1 not set"
            print *," should not need more recursion "
            print *," to set patch boundaries"
            print '("start at row: ",i4," col ",i4)', nrowst,ncolst
            stop
        endif

        ! We begin by initializing the level level arrays, so that we can use
        ! purely recursive formulation for interpolating.
        dx_coarse  = hxposs(level - 1)
        dy_coarse  = hyposs(level - 1)

        ! Adjust unset_indices to account for the patch
        ! isl, isr, jsb, jst
        unset_indices(1) = unset_indices(1) + ilo - 1
        unset_indices(2) = unset_indices(2) + ilo - 1
        unset_indices(3) = unset_indices(3) + jlo - 1
        unset_indices(4) = unset_indices(4) + jlo - 1

        ! Coarsened geometry
        refinement_ratio_x = intratx(level - 1)
        refinement_ratio_y = intraty(level - 1)

        ! New patch rectangle (after we have partially filled it in) but in the
        ! coarse patches [iplo,iphi,jplo,jphi]

        iplo = (unset_indices(1) - refinement_ratio_x + nghost * refinement_ratio_x) &
                                                 / refinement_ratio_x - nghost
        iphi = (unset_indices(2) + refinement_ratio_x) / refinement_ratio_x
        jplo = (unset_indices(3) - refinement_ratio_y + nghost * refinement_ratio_y) &
                                                / refinement_ratio_y - nghost
        jphi = (unset_indices(4) + refinement_ratio_y) / refinement_ratio_y

        xlow_coarse = xlower + iplo * dx_coarse
        ylow_coarse = ylower + jplo * dy_coarse

        ! Coarse grid number of spatial points (nrowc,ncolc)
        mx_coarse   =  iphi - iplo + 1
        my_coarse   =  jphi - jplo + 1

        ! Check to make sure we created big enough scratch arrays
        if (mx_coarse > ihi - ilo + 3 .or. &
            my_coarse > jhi - jlo + 3) then

            print *," did not make big enough work space in filrecur "
            print *," need coarse space with mx_coarse,my_coarse ",mx_coarse,my_coarse
            print *," made space for ilo,ihi,jlo,jhi ",ilo,ihi,jlo,jhi
            stop
        endif

        ! Set the aux array values for the coarse grid, this could be done 
        ! instead in intfil using possibly already available bathy data from the
        ! grids
        if (naux > 0) then
            nghost_patch = 0
            lencrse = (ihi-ilo+3)*(jhi-jlo+3)*naux ! set 1 component, not all naux
            do k = 1, lencrse, naux
              auxcrse(k) = needs_to_be_set ! new system checks initialization before setting aux vals
            end do
            call system_clock(clock_start, clock_rate)
            call cpu_time(cpu_start)
            call setaux(nghost_patch, mx_coarse,my_coarse,  &
                       xlow_coarse, ylow_coarse,            &
                        dx_coarse,dy_coarse,naux,auxcrse)
            call system_clock(clock_finish, clock_rate)
            call cpu_time(cpu_finish)
            timesetaux = timesetaux + clock_finish - clock_start
            timesetauxcpu = timesetaux + cpu_finish - cpu_start
        endif

        ! Fill in the edges of the coarse grid
        if ((xperdom .or. (yperdom .or. spheredom)) .and.  sticksout(iplo,iphi,jplo,jphi)) then
            call prefilrecur(level-1,nvar,valcrse,auxcrse,naux,t,mx_coarse,my_coarse,1,1,iplo,iphi,jplo,jphi)
        else
            call filrecur(level-1,nvar,valcrse,auxcrse,naux,t,mx_coarse,my_coarse,1,1,iplo,iphi,jplo,jphi)
        endif

        do i_fine = 1,mx_patch
            i_coarse = 2 + (i_fine - (unset_indices(1) - ilo) - 1) / refinement_ratio_x
            eta1 = (-0.5d0 + real(mod(i_fine - 1, refinement_ratio_x),kind=8)) &
                                / real(refinement_ratio_x,kind=8)

            do j_fine  = 1,my_patch
                j_coarse = 2 + (j_fine - (unset_indices(3) - jlo) - 1) / refinement_ratio_y
                eta2 = (-0.5d0 + real(mod(j_fine - 1, refinement_ratio_y),kind=8)) &
                                    / real(refinement_ratio_y,kind=8)

                if (flaguse(i_fine,j_fine) == 0) then

                    do n=1,nvar

                        valp10 = valcrse(coarse_index(n,i_coarse + 1,j_coarse))
                        valm10 = valcrse(coarse_index(n,i_coarse - 1,j_coarse))
                        valc   = valcrse(coarse_index(n,i_coarse    ,j_coarse))
                        valp01 = valcrse(coarse_index(n,i_coarse    ,j_coarse + 1))
                        valm01 = valcrse(coarse_index(n,i_coarse    ,j_coarse - 1))
        
                        dupc = valp10 - valc
                        dumc = valc   - valm10
                        ducc = valp10 - valm10
                        du   = min(abs(dupc), abs(dumc))
                        du   = min(2.d0 * du, 0.5d0 * abs(ducc))
                        fu = max(0.d0, sign(1.d0, dupc * dumc))
        
                        dvpc = valp01 - valc
                        dvmc = valc   - valm01
                        dvcc = valp01 - valm01
                        dv   = min(abs(dvpc), abs(dvmc))
                        dv   = min(2.d0 * dv, 0.5d0 * abs(dvcc))
                        fv = max(0.d0,sign(1.d0, dvpc * dvmc))

                        valint = valc + eta1 * du * sign(1.d0, ducc) * fu &
                                      + eta2 * dv * sign(1.d0, dvcc) * fv


                        valbig(n,i_fine+nrowst-1,j_fine+ncolst-1) = valint

                    end do

                endif
            end do
        end do
    end if

    !  set bcs, whether or not recursive calls needed. set any part of patch
    !  that stuck out
    xhi_fine = xlower + (ihi + 1) * dx_fine
    yhi_fine = ylower + (jhi + 1) * dy_fine
    call bc2amr(valbig,aux,mx,my,nvar,naux,dx_fine,dy_fine,level,t,xlow_fine,xhi_fine, &
                ylow_fine,yhi_fine,xlower,ylower,xupper,yupper,xperdom,yperdom,spheredom)

contains

    integer pure function coarse_index(n,i,j)
        implicit none
        integer, intent(in) :: n, i, j
        coarse_index = n + nvar*(i-1)+nvar*mx_coarse*(j-1)
    end function coarse_index

    logical pure function sticksout(iplo,iphi,jplo,jphi)
        implicit none
        integer, intent(in) :: iplo,iphi,jplo,jphi
        sticksout = (iplo < 0 .or. jplo < 0 .or. &
                     iphi >= iregsz(level - 1) .or. jphi >= jregsz(level - 1))
    end function sticksout

Here is the call graph for this function:

sticksout()

logical pure function filrecur::sticksout	(	integer, intent(in)	iplo,
		integer, intent(in)	iphi,
		integer, intent(in)	jplo,
		integer, intent(in)	jphi
	)

Definition at line 266 of file filpatch_orig.f90.

References sticksout().

        implicit none
        integer, intent(in) :: iplo,iphi,jplo,jphi
        sticksout = (iplo < 0 .or. jplo < 0 .or. &
                     iphi >= iregsz(level - 1) .or. jphi >= jregsz(level - 1))

Here is the call graph for this function: